Heating and cooling in Burlington
Furnaces, air conditioners and heat pumps in Burlington
Grimsby Heating and Cooling repairs, replaces and maintains heating and cooling equipment in Burlington. The technician traces each fault to a specific part, takes the readings that confirm it and writes down the price before any work starts.
How the houses in Burlington shape the work
Grimsby Heating and Cooling travels from Grimsby to Burlington to repair and replace furnaces, air conditioners and heat pumps, and to carry out seasonal maintenance. Each visit starts with the equipment, venting and ductwork as they actually are in your house. The technician traces the symptom to a specific part and writes the price down before anything is changed.
Furnace and air conditioning service in Burlington
Grimsby Heating and Cooling makes the trip from Grimsby to Burlington for furnace repair, replacement, heat pumps, central air and seasonal maintenance. We make no assumptions about what is in your basement before we see it, so the first visit starts with the equipment, the venting and the ductwork as they are.
What the technician tests first
- No heat, or cold air from the registers: the igniter, flame sensor, pressure switch and limit switch are tested in order, because each one stops the burner for a different reason.
- Short cycling: the technician checks the filter and measures the temperature rise across the heat exchanger, since an overheating furnace shuts itself off on its high-limit switch.
- An air conditioner that runs but does not cool: refrigerant pressures, superheat and subcooling are measured before anyone talks about a leak or a new compressor.
Work is performed by TSSA-certified gas technicians. Work is performed by 313A refrigeration and air conditioning mechanics.
When replacement makes more sense
A new furnace or air conditioner is sized from a load calculation and a look at the duct system, not from the rating plate on the old unit. See furnace installation and replacement and air conditioning installation.
Booking a visit in Burlington
Describe what the system is doing through the contact page, or ask for a written price on planned work through the quote form. You see the figure and decide before a part is fitted.
Communities we serve
- Palmer
- Clarksdale
- Brant Hills
- Dynes
- Freeman
- Tyandaga
- Orchard
- Longmoor
- Port Nelson
- Roseland
- Maple
- La Salle
- Indian Point
- Burlington Beach
- Aldershot
- Bayview
Heating and cooling services in Burlington
Furnace repair in Grimsby
Furnace repair in Burlington
Furnace repair in Burlington, with each fault measured and traced to the part before a written price is given.
Learn more
Grimsby furnace installation
Furnace installation and replacement in Burlington
Grimsby Heating and Cooling sizes and installs high-efficiency furnaces for homes in Burlington, with the ducts, venting and chimney checked before any price is written.
Learn more
Central air repair in Grimsby
Air conditioner repair in Burlington
Central air repair in Burlington, with every fault traced to a measured cause and priced in writing before work begins.
Learn more
Central air and ductless in Grimsby
Air conditioning installation in Burlington
Grimsby Heating and Cooling installs central air and ductless systems in Burlington, sized from a measured load and duct assessment of each house.
Learn more
Cold-climate and hybrid systems
Heat pumps in Burlington
Grimsby Heating and Cooling installs and repairs cold-climate, ductless and hybrid heat pumps in Burlington, sized from the house and its ducts.
Learn more
Seasonal tune-ups in Grimsby
Furnace and AC maintenance in Burlington
Grimsby Heating and Cooling tunes up furnaces, air conditioners and heat pumps in Burlington, with vent, drain and chimney checks matched to the age of the house.
Learn moreQuestions from homeowners in Burlington
Does Grimsby Heating and Cooling repair furnaces in Burlington?
Yes. Technicians come from Grimsby to Burlington for furnace faults such as no heat, cold air from the vents, short cycling and unusual noises. When you get in touch, tell us the make of furnace if you know it, what it is doing and whether a light on the control board is flashing. That helps the technician bring the likely parts. See furnace repair or send the details through the contact page.
Why is my furnace not kicking on, or blowing cold air?
When the thermostat calls for heat, the furnace runs a fixed sequence: inducer motor starts, pressure switch closes, igniter heats, gas valve opens, flame sensor proves the flame. A fault at any step stops the burner, and the blower may keep running and push cold air. Common causes are a dirty flame sensor, a cracked igniter, a blocked condensate trap or a clogged filter tripping the high limit. Switching the furnace off and on clears a lockout once, but repeated resets hide the fault. See our guide on a furnace running but not heating.
Should an old furnace be repaired or replaced?
Age alone does not decide it; the fault and the house do. A failed igniter or blower capacitor in an older furnace is a small repair. A cracked heat exchanger, the most expensive part on a furnace, usually means replacement, and it should not be left running because it can let combustion gases into the house. Parts availability, efficiency and whether the ductwork suits a new unit also matter. A replacement is sized from a load and duct assessment, not the old label. Read the repair or replace guide.
Nearby communities
Besides Burlington, our technicians also work in Beamsville, Smithville and Stoney Creek.
- Heating and cooling in Beamsville
- Heating and cooling in Smithville
- Heating and cooling in Stoney Creek
- Heating and cooling in Binbrook
- Heating and cooling in Hamilton
- Heating and cooling in Waterdown
- Heating and cooling in Dundas
- Heating and cooling in Oakville
- Heating and cooling in Caledonia
- Heating and cooling in Ancaster
- Heating and cooling in Flamborough
- Heating and cooling in Milton
Tell us what your system in Burlington is doing
Tell us what your furnace, air conditioner or heat pump is doing. The technician measures, explains the cause and writes down the price before any work begins.